3 blade 6.5x9" propeller, ex 9.9hp Mercury two stroke.
This prop will not fit my new 9.9 merc. four stroke because of different splines.
So I'll let it go for a reasonable offer plus postage (1.5kg packed, ex Perth, WA).
The pic shows the hi reverse thrust modification as was suggested on this forum some time ago. I used aluminium tubes which are epoxied in place. This has stood up well while in use, the propeller is in good condition but could use a coat of paint if you are fussy.
It fits an 8 spline 1/2" (small dia.) shaft.
All info added is on a "VOLUNTEER" basis, so no responsibility will be taken for accuracy or lack of completeness by TSP.
1 post • Page 1 of 1